Your IP : 192.168.165.1
<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<PropertyGroup>
<BuildSystem>MSBuild</BuildSystem>
<TaskVersion Condition=" ('$(TargetFrameworkVersion)' == 'v3.0' or '$(TargetFrameworkVersion)' == 'v3.5') ">3.0.0.0</TaskVersion>
<TaskVersion Condition=" ('$(TargetFrameworkIdentifier)' == 'Silverlight')">4.0.0.0</TaskVersion>
<TaskVersion Condition="'$(TaskVersion)' == ''">4.0.0.0</TaskVersion>
<TaskKeyToken>31bf3856ad364e35</TaskKeyToken>
<BuildTaskAssembly Condition="'$(BuildTaskAssembly)'==''">PresentationBuildTasks, Version=$(TaskVersion), Culture=neutral, PublicKeyToken=$(TaskKeyToken)</BuildTaskAssembly>
<AlwaysCompileMarkupFilesInSeparateDomain Condition="'$(BuildingInsideVisualStudio)' == 'true' and '$(AlwaysCompileMarkupFilesInSeparateDomain)' == ''">true</AlwaysCompileMarkupFilesInSeparateDomain>
<AlwaysCompileMarkupFilesInSeparateDomain Condition="'$(AlwaysCompileMarkupFilesInSeparateDomain)' == '' ">true</AlwaysCompileMarkupFilesInSeparateDomain>
<LocalizationDirectivesToLocFile Condition="'$(LocalizationDirectivesToLocFile)' == ''">None</LocalizationDirectivesToLocFile>
<GetReferenceAssemblyPathsDependsOn>
$(GetReferenceAssemblyPathsDependsOn);
GetWinFXPath
</GetReferenceAssemblyPathsDependsOn>
</PropertyGroup>
<UsingTask TaskName="Microsoft.Build.Tasks.Windows.MarkupCompilePass1" AssemblyName="$(BuildTaskAssembly)" />
<UsingTask TaskName="Microsoft.Build.Tasks.Windows.UidManager" AssemblyName="$(BuildTaskAssembly)" />
<UsingTask TaskName="Microsoft.Build.Tasks.Windows.ResourcesGenerator" AssemblyName="$(BuildTaskAssembly)" />
<UsingTask TaskName="Microsoft.Build.Tasks.Windows.FileClassifier" AssemblyName="$(BuildTaskAssembly)" />
<UsingTask TaskName="Microsoft.Build.Tasks.Windows.MarkupCompilePass2" AssemblyName="$(BuildTaskAssembly)" />
<UsingTask TaskName="Microsoft.Build.Tasks.Windows.GenerateTemporaryTargetAssembly" AssemblyName="$(BuildTaskAssembly)" />
<UsingTask TaskName="Microsoft.Build.Tasks.Windows.MergeLocalizationDirectives" AssemblyName="$(BuildTaskAssembly)" />
<UsingTask TaskName="Microsoft.Build.Tasks.Windows.GetWinFXPath" AssemblyName="$(BuildTaskAssembly)" />
<!-- This target has been kept for compatibility with other targets or projects which override GetWinFXNativePath or GetWinFXWowPath.
This target and the properties are deprecated because multi-targeting for reference assemblies is handled in the framework specific targets
-->
<Target Name="GetWinFXPath" Condition="('@(Page)' != '' or '@(ApplicationDefinition)' != '' or '@(Resource)' != '') and ('$(GetWinFXNativePath)' != '' or '$(GetWinFXWoWPath)' != '' )" >
<GetWinFXPath WinFXNativePath="$(WinFXNativePath)"
WinFXWowPath="$(WinFXWowPath)" >
<Output TaskParameter="WinFXPath" PropertyName="WinFXAssemblyDirectory" Condition="'$(ReferenceWinFXAssemblyFromGAC)' != 'true' "/>
</GetWinFXPath>
</Target>
<!-- Some Default Settings -->
<PropertyGroup>
<!--
XamlDebuggingInformation property controls whether or not to put line number information in the
generated binary file for a Xaml markup file.
If XamlDebuggingInformation is set in project file, take whatever setting.
If XamlDebuggingInformation property is not explicitly set, and the current build is for debug,
Set true to XamlDebuggingInformation, if the build is not for Debug, keep the empty setting for
XamlDebuggingInformation, it means not to put line number information in the generated binary file.
-->
<XamlDebuggingInformation Condition="'$(XamlDebuggingInformation)' == '' and '$(ConfigurationName)' == 'Debug'">true</XamlDebuggingInformation>
<HostInBrowser Condition="'$(HostInBrowser)'==''">false</HostInBrowser>
<Version Condition="'$(Version)'==''">1.0.0.0</Version>
<DeploymentType Condition="'$(DeploymentType)'==''">Installed</DeploymentType>
<RunAfterInstall Condition="'$(RunAfterInstall)'==''">true</RunAfterInstall>
<GeneratedFileExtension>.g$(DefaultLanguageSourceExtension)</GeneratedFileExtension>
<OSVersion Condition="'$(OSVersion)' == ''">5.1.2600.0</OSVersion>
<!-- Initialize some Local-Type_Ref related properties -->
<_RequireMCPass2ForSatelliteAssemblyOnly>false</_RequireMCPass2ForSatelliteAssemblyOnly>
<_RequireMCPass2ForMainAssembly>false</_RequireMCPass2ForMainAssembly>
</PropertyGroup>
<PropertyGroup>
<IsApplication Condition="'$(OutputType)'=='exe'">true</IsApplication>
<IsApplication Condition="'$(OutputType)'=='winexe'">true</IsApplication>
<IsLibrary Condition="'$(OutputType)'=='library'">true</IsLibrary>
<IsLibrary Condition="'$(OutputType)'=='module'">true</IsLibrary>
</PropertyGroup>
<PropertyGroup>
<!--
Inject AssignWinFXEmbeddedResource target at right stage.
-->
<PrepareResourceNamesDependsOn>
AssignWinFXEmbeddedResource;
$(PrepareResourceNamesDependsOn)
</PrepareResourceNamesDependsOn>
</PropertyGroup>
<!-- Common Application and Library Property settings -->
<PropertyGroup>
<PrepareResourcesDependsOn>
MarkupCompilePass1;
AfterMarkupCompilePass1;
MarkupCompilePass2ForMainAssembly;
FileClassification;
MainResourcesGeneration;
$(PrepareResourcesDependsOn)
</PrepareResourcesDependsOn>
</PropertyGroup>
<PropertyGroup>
<!-- Add Markup compilation to the CoreCompileDependsOn so that the IDE inproc compilers (particularly VB)
can "see" the generated source files. -->
<CoreCompileDependsOn Condition="'$(BuildingInsideVisualStudio)' == 'true' ">
DesignTimeMarkupCompilation;
$(CoreCompileDependsOn)
</CoreCompileDependsOn>
</PropertyGroup>
<Target Name="DesignTimeMarkupCompilation">
<!-- Only if we are not actually performing a compile i.e. we are in design mode -->
<CallTarget Condition="'$(BuildingProject)' != 'true'"
Targets="MarkupCompilePass1" />
</Target>
<!-- WinFX specific ItemGroup -->
<ItemGroup Condition="'$(BuildingInsideVisualStudio)'=='true'">
<!--
Add WinFX specific Item names to AvailableItemName item, so that they can show up
in a drop-down menu for Build Action field of the properties window in VisualStudio.
-->
<AvailableItemName Include="ApplicationDefinition" />
<AvailableItemName Include="Page" />
<AvailableItemName Include="Resource" />
<AvailableItemName Include="SplashScreen" />
<AvailableItemName Include="DesignData" />
<AvailableItemName Include="DesignDataWithDesignTimeCreatableTypes" />
</ItemGroup>
<!--
Prepare Resource For SatelliteAssemblies.
-->
<PropertyGroup Condition="'$(UICulture)' != ''" >
<PrepareResourcesForSatelliteAssembliesDependsOn>
SatelliteOnlyMarkupCompilePass2;
SatelliteResourceGeneration;
GenerateResourceWithCultureItem;
</PrepareResourcesForSatelliteAssembliesDependsOn>
</PropertyGroup>
<Target Name="PrepareResourcesForSatelliteAssemblies"
Condition="'$(UICulture)' != ''"
DependsOnTargets="$(PrepareResourcesForSatelliteAssembliesDependsOn)" >
</Target>
<PropertyGroup>
<!--
Hook up AfterCompileWinFX to that it runs
where AfterCompile would have run
-->
<CompileDependsOn>
$(CompileDependsOn);
_AfterCompileWinFXInternal
</CompileDependsOn>
<!--
Any targets that _AfterCompileWinFXInternal depends on.
After the xaml file is compiled, the build system needs to generate a final .loc file
for localization support. MergeLocalizationDirectives target does this.
If UICulture is set, it needs to do below extra work before generating the .loc file:
1. Calls the MarkupCompilePass2 for those xaml file which reference local types.
2. Generate the .resources for given culture from .baml and other resource files.
Target PrepareResourcesForSatelliteAssemblies is for this.
-->
<_AfterCompileWinFXInternalDependsOn>
PrepareResourcesForSatelliteAssemblies;
MergeLocalizationDirectives;
AfterCompileWinFX
</_AfterCompileWinFXInternalDependsOn>
</PropertyGroup>
<!-- Work that we want to be done after the "Compile" target in Microsoft.Common.targets -->
<Target Name="_AfterCompileWinFXInternal" DependsOnTargets="$(_AfterCompileWinFXInternalDependsOn)" />
<!--
===========================================================================================
Extensibility Points
Redefine these targets in your project in order to run tasks just after
MarkupCompilePass1, MarkupCompilePass2 or the entire WinFXCompile.
===========================================================================================
-->
<Target Name="AfterCompileWinFX"/>
<Target Name="AfterMarkupCompilePass1" />
<Target Name="AfterMarkupCompilePass2" />
<!--
Name : MarkupCompilePass1
This target generates code for every xaml file as well it also generates code for main and IResourceLoader.
This target uses MarkupCompilePass1 task.
-->
<!--
================================================================
MarkupCompilePass1
================================================================
-->
<Target Name="MarkupCompilePass1"
DependsOnTargets="$(MarkupCompilePass1DependsOn);SplashScreenValidation"
Condition="'@(Page)' != '' or '@(ApplicationDefinition)' != '' " >
<Message Text="(in) Page: '@(Page)'" Condition="'$(MSBuildTargetsVerbose)'=='true'"/>
<Message Text="(in) ApplicationDefinition: '@(ApplicationDefinition)'" Condition="'$(MSBuildTargetsVerbose)'=='true'"/>
<Message Text="(in) Resource: '@(Resource)'" Condition="'$(MSBuildTargetsVerbose)'=='true'"/>
<Message Text="(in) CodeGenReference: '@(ReferencePath)'" Condition="'$(MSBuildTargetsVerbose)'=='true'"/>
<!--
When performing an intellisense compile, we don't want to abort the compile if
MarkupCompilePass1 fails. This would prevent the list of files from being handed
off to the compiler, thereby breaking all intellisense. For intellisense compiles
we set ContinueOnError to true. The property defined here is used as the value
for ContinueOnError on the MarkupCompilePass1 task.
-->
<PropertyGroup>
<_IntellisenseOnlyCompile>false</_IntellisenseOnlyCompile>
<_IntellisenseOnlyCompile Condition="'$(BuildingProject)' != 'true'">true</_IntellisenseOnlyCompile>
</PropertyGroup>
<MarkupCompilePass1
Language="$(Language)"
UICulture="$(UICulture)"
ApplicationMarkup="@(ApplicationDefinition)"
SplashScreen="@(SplashScreen)"
LanguageSourceExtension="$(DefaultLanguageSourceExtension)"
PageMarkup="@(Page)"
ContentFiles="@(Content)"
AssemblyName="$(AssemblyName)"
OutputType="$(OutputType)"
AssemblyVersion="$(AssemblyVersion)"
AssemblyPublicKeyToken="$(AssemblyPublicKeyToken)"
References="@(ReferencePath)"
RootNamespace="$(RootNamespace)"
KnownReferencePaths="$(MSBuildBinPath);$(TargetFrameworkDirectory);@(_TargetFrameworkSDKDirectoryItem);@(KnownReferencePaths)"
AssembliesGeneratedDuringBuild="@(AssembliesGeneratedDuringBuild)"
AlwaysCompileMarkupFilesInSeparateDomain="$(AlwaysCompileMarkupFilesInSeparateDomain)"
HostInBrowser="$(HostInBrowser)"
LocalizationDirectivesToLocFile="$(LocalizationDirectivesToLocFile)"
ContinueOnError="$(_IntellisenseOnlyCompile)"
SourceCodeFiles="@(Compile)"
DefineConstants="$(DefineConstants)"
ExtraBuildControlFiles="@(ExtraBuildControlFiles)"
XamlDebuggingInformation="$(XamlDebuggingInformation)"
IsRunningInVisualStudio="$(BuildingInsideVisualStudio)"
OutputPath="$(IntermediateOutputPath)">
<Output ItemName="GeneratedBaml" TaskParameter="GeneratedBamlFiles"/>
<Output ItemName="GeneratedLocalizationFiles" TaskParameter="GeneratedLocalizationFiles" />
<Output PropertyName="_RequireMCPass2ForMainAssembly" TaskParameter="RequirePass2ForMainAssembly" />
<Output PropertyName="_RequireMCPass2ForSatelliteAssemblyOnly" TaskParameter="RequirePass2ForSatelliteAssembly" />
<Output ItemName="Compile" TaskParameter="GeneratedCodeFiles" />
<!-- Keep a list of all the generated files, it is used to clean up for a next clean build -->
<Output ItemName="FileWrites" TaskParameter="AllGeneratedFiles" />
<Output ItemName="_GeneratedCodeFiles"
TaskParameter="GeneratedCodeFiles" />
</MarkupCompilePass1>
<Message Text="(out) GeneratedBamlFiles: '@(GeneratedBaml)'" Condition="'$(MSBuildTargetsVerbose)'=='true'"/>
<Message Text="(out) SourceCodeFiles: '@(Compile)'" Condition="'$(MSBuildTargetsVerbose)'=='true'"/>
<Message Text="(Out) GeneratedCodeFiles: '@(_GeneratedCodeFiles)'" Condition="'$(MSBuildTargetsVerbose)'=='true'"/>
<Message Text="(out) GeneratedLocalizationFiles: @(GeneratedLocalizationFiles)" Condition="'$(MSBuildTargetsVerbose)'=='true'" />
<Message Text="(out) _RequireMCPass2ForMainAssembly : '$(_RequireMCPass2ForMainAssembly)'" Condition="'$(MSBuildTargetsVerbose)'=='true'"/>
<Message Text="(out) _RequireMCPass2ForSatelliteAssemblyOnly : '$(_RequireMCPass2ForSatelliteAssemblyOnly)'" Condition="'$(MSBuildTargetsVerbose)'=='true'"/>
</Target>
<!--
================================================================
MarkupCompilePass2
================================================================
Name: MarkupCompilePass2
For those xaml files that contain local-implemented types, this target will invoke MarkupCompilePass2
task to compile those xaml files after the main assembly is generated.
If MarkupCompilePass1 task is not invoked, that means there is no any Xaml input file change since last build,
and then it is not required to run this MarkupCompilePass2 either.
-->
<Target Name="MarkupCompilePass2"
Condition="Exists('$(IntermediateOutputPath)$(AssemblyName)_MarkupCompile.lref')" >
<Message Text="(in) References: '@(ReferencePath);@(AssemblyForLocalTypeReference)'" Condition="'$(MSBuildTargetsVerbose)'=='true'" />
<MarkupCompilePass2
AssemblyName="$(AssemblyName)"
OutputType="$(OutputType)"
Language="$(Language)"
LocalizationDirectivesToLocFile="$(LocalizationDirectivesToLocFile)"
RootNamespace="$(RootNamespace)"
References="@(ReferencePath);@(AssemblyForLocalTypeReference)"
KnownReferencePaths="$(MSBuildBinPath);$(TargetFrameworkDirectory);@(_TargetFrameworkSDKDirectoryItem);@(KnownReferencePaths)"
AssembliesGeneratedDuringBuild="@(AssembliesGeneratedDuringBuild)"
AlwaysCompileMarkupFilesInSeparateDomain="$(AlwaysCompileMarkupFilesInSeparateDomain)"
XamlDebuggingInformation="$(XamlDebuggingInformation)"
GeneratedBaml=""
OutputPath="$(IntermediateOutputPath)"
ContinueOnError="false" >
<!--
Output Items for MarkupCompilePass2
If MarkupCompilePass2 is only for SatelliteAssembly, Append all the generated baml files into SatelliteEmbeddedFiles, No FileClassifier is required.
If MarupCompilePass2 is for Main Assembly as well, output the Baml files into GeneratedBaml, FileClassifier task will be invoked later.
-->
<Output ItemName="GeneratedBamlWithLocalType"
TaskParameter="GeneratedBaml"
Condition="'$(MSBuildTargetsVerbose)'=='true'"/>
<Output ItemName="GeneratedBaml"
TaskParameter="GeneratedBaml"
Condition="'$(_RequireMCPass2ForMainAssembly)' == 'true'" />
<Output ItemName="SatelliteEmbeddedFiles"
TaskParameter="GeneratedBaml"
Condition="'$(_RequireMCPass2ForSatelliteAssemblyOnly)' == 'true'" />
<!-- Put the generated files in item FileWrites so that they can be cleaned up appropriately in a next Rebuild -->
<Output ItemName="FileWrites" TaskParameter="GeneratedBaml" />
</MarkupCompilePass2>
<Message Text="(out) After MarkupCompilePass2, SatelliteEmbeddedFiles: '@(SatelliteEmbeddedFiles)'" Condition="'$(MSBuildTargetsVerbose)'=='true'"/>
<Message Text="(out) GeneratedBamlWithLocalType: '@(GeneratedBamlWithLocalType)'" Condition="'$(MSBuildTargetsVerbose)'=='true'"/>
</Target>
<!--
================================================================
MarkupCompilePass2ForMainAssembly
================================================================
Name : MarkupCompilePass2ForMainAssembly
This target is invoked only when there is a xaml file which references local-type and is to embed into main assembly.
It is possible when UICulture is not set, or the xaml file has explicitly set Localizable metadata to false.
Condition: _RequireMCPass2ForMainAssembly == true
-->
<PropertyGroup>
<MarkupCompilePass2ForMainAssemblyDependsOn>
GenerateTemporaryTargetAssembly;
MarkupCompilePass2;
AfterMarkupCompilePass2;
CleanupTemporaryTargetAssembly
</MarkupCompilePass2ForMainAssemblyDependsOn>
<_CompileTargetNameForLocalType Condition="'$(_CompileTargetNameForLocalType)' == ''">_CompileTemporaryAssembly</_CompileTargetNameForLocalType>
</PropertyGroup>
<Target Name="_CompileTemporaryAssembly" DependsOnTargets="BuildOnlySettings;ResolveKeySource;CoreCompile" />
<Target Name="MarkupCompilePass2ForMainAssembly"
Condition="'$(_RequireMCPass2ForMainAssembly)' == 'true' "
DependsOnTargets="$(MarkupCompilePass2ForMainAssemblyDependsOn)" >
</Target>
<!--
==========================================
GenerateTemporaryTargetAssembly
==========================================
Name : GenerateTemporaryTargetAssembly
-->
<Target Name="GenerateTemporaryTargetAssembly"
Condition="'$(_RequireMCPass2ForMainAssembly)' == 'true' " >
<Message Text="MSBuildProjectFile is $(MSBuildProjectFile)" Condition="'$(MSBuildTargetsVerbose)' == 'true'" />
<GenerateTemporaryTargetAssembly
CurrentProject="$(MSBuildProjectFullPath)"
MSBuildBinPath="$(MSBuildBinPath)"
ReferencePathTypeName="ReferencePath"
CompileTypeName="Compile"
GeneratedCodeFiles="@(_GeneratedCodeFiles)"
ReferencePath="@(ReferencePath)"
IntermediateOutputPath="$(IntermediateOutputPath)"
AssemblyName="$(AssemblyName)"
CompileTargetName="$(_CompileTargetNameForLocalType)"
GenerateTemporaryTargetAssemblyDebuggingInformation="$(GenerateTemporaryTargetAssemblyDebuggingInformation)"
>
</GenerateTemporaryTargetAssembly>
<CreateItem Include="$(IntermediateOutputPath)$(TargetFileName)" >
<Output TaskParameter="Include" ItemName="AssemblyForLocalTypeReference" />
</CreateItem>
</Target>
<!--
===========================================
CleanupTemporaryTargetAssembly
===========================================
Name : CleanupTemporaryTargetAssembly
-->
<Target Name="CleanupTemporaryTargetAssembly" >
<Message Text="Remove the temporary project and target assembly" Condition="'$(MSBuildTargetsVerbose)'=='true'" />
<Delete Files="@(AssemblyForLocalTypeReference)"
Condition="Exists('%(Fullpath)')" />
</Target>
<!--
================================================================
SatelliteOnlyMarkupCompilePass2
================================================================
Name : SatelliteOnlyMarkupCompilePass2
This target is invoked only when there is a xaml file which references local-type and no such xaml file is going
to be embedded into main assembly.
Condition: _RequireMCPass2ForSatelliteAssemblyOnly == true
-->
<Target Name="AddIntermediateAssemblyToReferenceList" >
<CreateItem Include="@(IntermediateAssembly)" >
<Output TaskParameter="Include" ItemName="AssemblyForLocalTypeReference" />
</CreateItem>
</Target>
<Target Name="SatelliteOnlyMarkupCompilePass2" Condition="'$(_RequireMCPass2ForSatelliteAssemblyOnly)' == 'true'"
DependsOnTargets="AddIntermediateAssemblyToReferenceList;MarkupCompilePass2" >
</Target>
<!--
============ Manifest Generation Related Properties, Targets ==============
-->
<PropertyGroup Condition="'$(HostInBrowser)' == 'true' and '$(IsApplication)' == 'true'" >
<!-- Set default value for some related properties -->
<!-- For Browser application, manifests should be signed even if the project is not getting published -->
<GenerateManifestsDependsOn>
HostInBrowserValidation;
GenerateApplicationManifest;
ResignApplicationManifest;
GenerateDeploymentManifest;
SignDeploymentManifest
</GenerateManifestsDependsOn>
<GenerateManifests Condition="'$(GenerateManifests)' == ''" >true</GenerateManifests>
<GenerateClickOnceManifests Condition="'$(GenerateClickOnceManifests)' == ''">$(GenerateManifests)</GenerateClickOnceManifests>
<!--
If 'install' is not set in project file, set it to false here.
But if 'install' is set in project, don't change it now. Later
the PropertyValidation target will check if it is correct or not.
-->
<Install Condition="'$(Install)'==''">false</Install>
<!--
The valid values for TargetZone are :
Internet, Intranet, LocalMachine, Custom
User can set all above vaild values in project file.
If this property is not set in project, for HostInBrowser,
we set default value 'Internet' here.
-->
<TargetZone Condition="'$(TargetZone)' == ''">Internet</TargetZone>
<!--
Overwrite below properties which have been set in Microsoft.Common.targets.
-->
<TargetUrl Condition="'$(TargetUrl)' != ''">$(TargetUrl)/$(TargetDeployManifestFileName)</TargetUrl>
<StartURL Condition="'$(StartURL)'==''">$(MSBuildProjectDirectory)\bin\$(Configuration)\$(TargetDeployManifestFileName)</StartURL>
<StartArguments Condition="'$(StartArguments)' == ''">-debug "$(StartURL)"</StartArguments>
<StartArguments Condition="'$(DebugSecurityZoneURL)' != ''">$(StartArguments) -DebugSecurityZoneURL "$(DebugSecurityZoneURL)"</StartArguments>
</PropertyGroup>
<!--
Do some property value check before the real manifest generation task starts.
WinFX.targets should care about the property setting for Browser application only.
For a regular ClickOnce application, Microsoft.Common.targets is responsible for
the setting validation.
-->
<Target Name="HostInBrowserValidation" Condition="'$(HostInBrowser)' == 'true'" >
<Message Text="(in) Install: '$(Install)'" Condition="'$(MSBuildTargetsVerbose)' == 'true'" />
<!--
TODO: Will get error message from Build task resource so that the message is
localizable and can be set an unique error ID.
-->
<Error Condition="'$(GenerateManifests)' != 'true'" Text="Property GenerateManifests should not be set a value other than true for a browser application." />
<Error Condition="'$(Install)' == 'true'" Text="Property Install and HostInBrowser should not be both set to true." />
<Error Condition=" '$(PlatformTarget)' != '' and '$(PlatformTarget)' != 'AnyCpu' "
Text="Cannot build a platform-specific XAML Browser Application. If HostInBrowser property is set to 'True', either do not set the PlatformTarget property or set it to 'AnyCpu'." />
</Target>
<Target Name="SplashScreenValidation" Condition="'@(SplashScreen)' != ''" >
<Error Condition="'$(TargetFrameworkVersion)' == 'v3.0'" Text="The SplashScreen Build Action is not supported in the selected Target Framework." />
</Target>
<!--
Resign Application Manifest after update.
_DeploymentResolvedManifestCertificateThumbprint property is set only when SignManifest is set to true.
-->
<Target Name="ResignApplicationManifest" Condition="'$(_DeploymentResolvedManifestCertificateThumbprint)'!= ''" >
<Message Text="(in) ApplicationManifest: '@(ApplicationManifest)'" Condition="'$(MSBuildTargetsVerbose)'=='true'"/>
<Message Text="(in) ManifestKeyFile: '$(ManifestKeyFile)'" Condition="'$(MSBuildTargetsVerbose)'=='true'"/>
<Message Text="(in) _DeploymentResolvedManifestCertificateThumbprint: '$(_DeploymentResolvedManifestCertificateThumbprint)'" Condition="'$(MSBuildTargetsVerbose)'=='true'"/>
<SignFile
CertificateThumbprint="$(_DeploymentResolvedManifestCertificateThumbprint)"
TimestampUrl="$(ManifestTimestampUrl)"
SigningTarget="@(ApplicationManifest)"/>
</Target>
<!--
Sign Deployment Manifest if SignManifest is set to true.
_DeploymentResolvedManifestCertificateThumbprint property is set only when SignManifest is set to true.
-->
<Target Name="SignDeploymentManifest" Condition=" '$(_DeploymentResolvedManifestCertificateThumbprint)' != '' " >
<Message Text="(in) DeployManifest: '@(DeployManifest)'" Condition="'$(MSBuildTargetsVerbose)'=='true'"/>
<Message Text="(in) ManifestKeyFile: '$(ManifestKeyFile)'" Condition="'$(MSBuildTargetsVerbose)'=='true'"/>
<Message Text="(in) _DeploymentResolvedManifestCertificateThumbprint: '$(_DeploymentResolvedManifestCertificateThumbprint)'" Condition="'$(MSBuildTargetsVerbose)'=='true'"/>
<SignFile
CertificateThumbprint="$(_DeploymentResolvedManifestCertificateThumbprint)"
TimestampUrl="$(ManifestTimestampUrl)"
SigningTarget="@(DeployManifest)"/>
</Target>
<!--
================================================================
FileClassification
================================================================
Classify baml and image files into different groups for Main assembly and satellite assembly respectively.
-->
<Target Name="FileClassification">
<FileClassifier Condition="'@(GeneratedBaml)' != '' or '@(Resource)' != '' or '@(Font)' != ''"
SourceFiles="@(SplashScreen);@(GeneratedBaml);@(Resource);@(Font)"
Culture="$(UICulture)"
OutputType="$(OutputType)"
MainEmbeddedFiles="@(MainEmbeddedFiles)"
SatelliteEmbeddedFiles="@(SatelliteEmbeddedFiles)"
CLREmbeddedResource="@(CLREmbeddedResources)"
CLRSatelliteEmbeddedResource="@(CLRSatelliteEmbeddedResources)"
CLRResourceFiles="@(CLRResources)" >
<Output ItemName="MainEmbeddedFiles" TaskParameter="MainEmbeddedFiles" />
<Output ItemName="SatelliteEmbeddedFiles" TaskParameter="SatelliteEmbeddedFiles" />
<Output ItemName="WinFXEmbeddedResource" TaskParameter="CLREmbeddedResource" />
<Output ItemName="WinFXEmbeddedResource" TaskParameter="CLRSatelliteEmbeddedResource" />
</FileClassifier>
<Message Text="(out) EmbeddedFiles: '@(MainEmbeddedFiles)'" Condition="'$(MSBuildTargetsVerbose)'=='true'"/>
<Message Text="(out) SatelliteEmbeddedFiles: '@(SatelliteEmbeddedFiles)'" Condition="'$(MSBuildTargetsVerbose)'=='true'"/>
</Target>
<!--
================================================================
MainResourcesGeneration
================================================================
-->
<PropertyGroup>
<!--
If the UICulture is not set, resources will be embedded into main assembly.
keep $(AssemblyName).g.resources as resource name for this scenario.
If the UICulture is set to some culture, all the localizable resources will
be embedded into satellite assembly, and all the non-localizable resources
will be embedded into main assembly. for this scenario, keep
$(AssemblyName).g for localizable resources,
$(AssemblyName).unlocalizable.g for unlocalizable resources
-->
<_ResourceNameInMainAssembly Condition="'$(UICulture)' == ''">$(AssemblyName).g.resources</_ResourceNameInMainAssembly>
<_ResourceNameInMainAssembly Condition="'$(UICulture)' != ''">$(AssemblyName).unlocalizable.g.resources</_ResourceNameInMainAssembly>
</PropertyGroup>
<Target Name="MainResourcesGeneration" Inputs="@(MainEmbeddedFiles)" Outputs="$(IntermediateOutputPath)$(_ResourceNameInMainAssembly)" Condition="'@(MainEmbeddedFiles)' != ''">
<!--
This generates .resources file containing all the resources that are to be
embedded in the main assembly and dont need to be localized
-->
<Message Text="(in) EmbeddedFiles: '@(MainEmbeddedFiles)'" Condition="'$(MSBuildTargetsVerbose)'=='true'"/>
<ResourcesGenerator
ResourceFiles="@(MainEmbeddedFiles)"
OutputPath="$(IntermediateOutputPath)"
OutputResourcesFile="$(IntermediateOutputPath)$(_ResourceNameInMainAssembly)"
Condition="'@(MainEmbeddedFiles)' != ''">
<!-- Put the generated files in item FileWrites so that they can be cleaned up appropriately in a next Rebuild -->
<Output ItemName="FileWrites" TaskParameter="OutputResourcesFile" />
</ResourcesGenerator>
<ItemGroup>
<EmbeddedResource Include="$(IntermediateOutputPath)$(_ResourceNameInMainAssembly)">
<GenerateResource>false</GenerateResource>
<Type>Resx</Type>
<WithCulture>false</WithCulture>
<OutputResource>$(IntermediateOutputPath)$(_ResourceNameInMainAssembly)</OutputResource>
</EmbeddedResource>
</ItemGroup>
</Target>
<!--
================================================================
SatelliteResourceGeneration
================================================================
This target just takes the SatelliteEmbeddedFiles such as .baml, images, fonts. etc
But not any $(Culture).resx and .resText etc. those files should have been handled by
PrepareResource target.
This target should output an EmbeddedResource Item, which is then taken by
CreateSatelliteAssemblies target.
-->
<Target Name="SatelliteResourceGeneration"
Condition="'$(UICulture)' != ''"
Inputs="@(SatelliteEmbeddedFiles)"
Outputs="$(IntermediateOutputPath)$(AssemblyName).g.$(UICulture).resources">
<!--
This generates .resources file containing all the resources that are to be embedded
in the satellite assembly and need to be localized.
This task only runs if the default culture of the build is not NULL
-->
<Message Text="(in) SatelliteEmbeddedFiles: '@(SatelliteEmbeddedFiles)'" Condition="'$(MSBuildTargetsVerbose)'=='true'"/>
<ResourcesGenerator
ResourceFiles="@(SatelliteEmbeddedFiles)"
OutputPath="$(IntermediateOutputPath)"
OutputResourcesFile="$(IntermediateOutputPath)$(AssemblyName).g.$(UICulture).resources"
Condition="'@(SatelliteEmbeddedFiles)' != ''">
<Output ItemName="_SatelliteResourceFile" TaskParameter="OutputResourcesFile" />
<!-- Put the generated files in item FileWrites so that they can be cleaned up appropriately in a next Rebuild -->
<Output ItemName="FileWrites" TaskParameter="OutputResourcesFile" />
</ResourcesGenerator>
<Message Text="(out) _SatelliteResourceFile is '@(_SatelliteResourceFile)'" Condition="'$(MSBuildTargetsVerbose)'=='true'"/>
</Target>
<!--
This target should always run after SatelliteResourceGeneration, so that it
can generate the correct Item which contains right Culture attribute even for
incremental build.
-->
<Target Name="GenerateResourceWithCultureItem" Condition="'$(UICulture)' != ''" >
<Message Text="(out) _SatelliteResourceFile: '@(_SatelliteResourceFile)'" Condition="'$(MSBuildTargetsVerbose)'=='true'"/>
<ItemGroup>
<EmbeddedResource Include="@(_SatelliteResourceFile)">
<Culture>$(UICulture)</Culture>
<GenerateResource>false</GenerateResource>
<Type>Resx</Type>
<WithCulture>true</WithCulture>
<OutputResource>@(_SatelliteResourceFile)</OutputResource>
</EmbeddedResource>
</ItemGroup>
</Target>
<!-- Overwrite some target and properties for Publish support -->
<!--
PublishBuildDependsOn property is defined in Microsoft.Common.targets, but it doesn't handle WinFX
resx file, since this resx file is not set into project file, but is generated at build time.
For Publish Build, we need to make sure the $(Target).g.$(UICulture).resources is handled correctly.
Add target "PrepareResourcesForSatelliteAssemblies" to the place prior to CreateSatelliteAssemblies.
-->
<PropertyGroup>
<PublishBuildDependsOn>
BuildOnlySettings;
PrepareForBuild;
ResolveReferences;
PrepareResources;
ResolveKeySource;
PrepareResourcesForSatelliteAssemblies;
GenerateSerializationAssemblies;
CreateSatelliteAssemblies;
</PublishBuildDependsOn>
</PropertyGroup>
<!--
SatelliteDllsProjectOutputGroup target is implemented in Microsoft.Common.targets, but it doesn't handle WinFX
satellite assembly, since for WinFX, the $(targetname).g.$(UICulture).resx is not set into project file, but is generated
at build time after Xaml file is compiled, (for some case, it is generated after the main dll is compiled).
So overwrite this target, copy the content from Microsoft.Common.targets and inject the part for our UICulture support.
-->
<!--
================================================================
SatelliteDllsProjectOutputGroup
================================================================
This target performs population of the Satellite Files project output group.
-->
<Target
Name="SatelliteDllsProjectOutputGroup"
DependsOnTargets="PrepareResourceNames"
Returns="@(SatelliteDllsProjectOutputGroupOutput)"
KeepDuplicateOutputs="False">
<CreateItem
Include="$(IntermediateOutputPath)%(ResxWithCulture.Culture)\$(TargetName).resources.dll"
AdditionalMetadata="TargetPath=%(ResxWithCulture.Culture)\$(TargetName).resources.dll"
Condition="'@(ResxWithCulture)' != ''">
<Output ItemName="SatelliteDllsProjectOutputGroupOutputIntermediate" TaskParameter="Include" />
</CreateItem>
<!-- This task is WinFX specific. -->
<CreateItem
Include="$(IntermediateOutputPath)$(UICulture)\$(TargetName).resources.dll"
AdditionalMetadata="TargetPath=$(UICulture)\$(TargetName).resources.dll"
Condition="'$(UICulture)' != ''">
<Output ItemName="SatelliteDllsProjectOutputGroupOutputIntermediate" TaskParameter="Include" />
</CreateItem>
<!-- End of WinFX specific -->
<CreateItem
Include="$(IntermediateOutputPath)%(NonResxWithCulture.Culture)\$(TargetName).resources.dll"
AdditionalMetadata="TargetPath=%(NonResxWithCulture.Culture)\$(TargetName).resources.dll"
Condition="'@(NonResxWithCulture)' != ''">
<Output ItemName="SatelliteDllsProjectOutputGroupOutputIntermediate" TaskParameter="Include" />
</CreateItem>
<CreateItem Include="$(IntermediateOutputPath)">
<Output ItemName="SatelliteDllsProjectOutputGroupRootRelativeUrlBaseIntermediate" TaskParameter="Include"/>
</CreateItem>
<!-- Convert intermediate items into final items; this way we can get the full path for each item. -->
<CreateItem Include="@(SatelliteDllsProjectOutputGroupOutputIntermediate->'%(FullPath)')">
<Output ItemName="SatelliteDllsProjectOutputGroupOutput" TaskParameter="Include"/>
</CreateItem>
</Target>
<!-- Other Targets -->
<Target Name="CheckUid"
Condition="'@(Page)' != '' or '@(ApplicationDefinition)' != ''">
<UidManager MarkupFiles="@(Page);@(ApplicationDefinition)" Task="Check" />
</Target>
<Target Name="UpdateUid"
Condition="'@(Page)' != '' or '@(ApplicationDefinition)' != ''">
<UidManager MarkupFiles="@(Page);
@(ApplicationDefinition)"
IntermediateDirectory ="$(IntermediateOutputPath)"
Task="Update" />
</Target>
<Target Name="RemoveUid"
Condition="'@(Page)' != '' or '@(ApplicationDefinition)' != ''">
<UidManager MarkupFiles="@(Page);
@(ApplicationDefinition)"
IntermediateDirectory ="$(IntermediateOutputPath)"
Task="Remove" />
</Target>
<!--
================================================================
MergeLocalizationDirectives
================================================================
Merge localization comments of single bamls into one file for the whole assembly.
-->
<Target Name="MergeLocalizationDirectives"
Condition="'@(GeneratedLocalizationFiles)' !=''"
Inputs="@(GeneratedLocalizationFiles)"
Outputs="$(IntermediateOutputPath)$(AssemblyName).loc"
>
<MergeLocalizationDirectives GeneratedLocalizationFiles="@(GeneratedLocalizationFiles)"
OutputFile="$(IntermediateOutputPath)$(AssemblyName).loc"/>
<!--
Add the merged loc file into _NoneWithTargetPath so that it will be copied to the
output directory
-->
<CreateItem Condition="Exists('$(IntermediateOutputPath)$(AssemblyName).loc')"
Include="$(IntermediateOutputPath)$(AssemblyName).loc"
AdditionalMetadata="CopyToOutputDirectory=PreserveNewest; TargetPath=$(AssemblyName).loc" >
<Output ItemName="_NoneWithTargetPath" TaskParameter="Include"/>
<Output ItemName="FileWrites" TaskParameter="Include"/>
</CreateItem>
</Target>
<!-- End of other targets -->
<!--
This is similar to AssignTargetPaths target in Microsoft.Common.targets.
But it handles only the generated WinFXEmbeddedResource item type.
After this target is done, SplitResourceByCulture target can take the right input
and handle the resource correctly.
-->
<Target Name="AssignWinFXEmbeddedResource"
Condition="'@(WinFXEmbeddedResource)' != ''" >
<ItemGroup>
<_Temporary Remove="@(_Temporary)" />
</ItemGroup>
<AssignTargetPath Files="@(WinFXEmbeddedResource)" RootFolder="$(MSBuildProjectDirectory)">
<Output TaskParameter="AssignedFiles" ItemName="_Temporary" />
</AssignTargetPath>
<ItemGroup>
<EmbeddedResource Remove="@(_Temporary)" />
<EmbeddedResource Include="@(_Temporary)" />
<_Temporary Remove="@(_Temporary)" />
</ItemGroup>
</Target>
<!-- End of the project file, Do not add any more propeties, items, targets etc. -->
</Project>