Your IP : 192.168.165.1
<!--
***********************************************************************************************
Microsoft.VisualBasic.targets
WARNING: DO NOT MODIFY this file unless you are knowledgeable about MSBuild and have
created a backup copy. Incorrect changes to this file will make it
impossible to load or build your projects from the command-line or the IDE.
This file defines the steps in the standard build process specific for VB .NET projects.
For example, it contains the step that actually calls the VB compiler. The remainder
of the build process is defined in Microsoft.Common.targets, which is imported by
this file.
Copyright (C) Microsoft Corporation. All rights reserved.
***********************************************************************************************
-->
<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<PropertyGroup>
<ImportByWildcardBeforeMicrosoftVisualBasicTargets Condition="'$(ImportByWildcardBeforeMicrosoftVisualBasicTargets)' == ''">true</ImportByWildcardBeforeMicrosoftVisualBasicTargets>
<ImportByWildcardAfterMicrosoftVisualBasicTargets Condition="'$(ImportByWildcardAfterMicrosoftVisualBasicTargets)' == ''">true</ImportByWildcardAfterMicrosoftVisualBasicTargets>
<ImportUserLocationsByWildcardBeforeMicrosoftVisualBasicTargets Condition="'$(ImportUserLocationsByWildcardBeforeMicrosoftVisualBasicTargets)' == ''">true</ImportUserLocationsByWildcardBeforeMicrosoftVisualBasicTargets>
<ImportUserLocationsByWildcardAfterMicrosoftVisualBasicTargets Condition="'$(ImportUserLocationsByWildcardAfterMicrosoftVisualBasicTargets)' == ''">true</ImportUserLocationsByWildcardAfterMicrosoftVisualBasicTargets>
</PropertyGroup>
<Import Project="$(MSBuildUserExtensionsPath)\$(MSBuildToolsVersion)\$(MSBuildThisFile)\ImportBefore\*" Condition="'$(ImportUserLocationsByWildcardBeforeMicrosoftVisualBasicTargets)' == 'true' and exists('$(MSBuildUserExtensionsPath)\$(MSBuildToolsVersion)\$(MSBuildThisFile)\ImportBefore')"/>
<Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\$(MSBuildThisFile)\ImportBefore\*" Condition="'$(ImportByWildcardBeforeMicrosoftVisualBasicTargets)' == 'true' and exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\$(MSBuildThisFile)\ImportBefore')"/>
<PropertyGroup>
<CustomBeforeMicrosoftVisualBasicTargets Condition="'$(CustomBeforeMicrosoftVisualBasicTargets)'==''">$(MSBuildExtensionsPath)\v$(MSBuildToolsVersion)\Custom.Before.$(MSBuildThisFile)</CustomBeforeMicrosoftVisualBasicTargets>
<CustomAfterMicrosoftVisualBasicTargets Condition="'$(CustomAfterMicrosoftVisualBasicTargets)'==''">$(MSBuildExtensionsPath)\v$(MSBuildToolsVersion)\Custom.After.$(MSBuildThisFile)</CustomAfterMicrosoftVisualBasicTargets>
</PropertyGroup>
<Import Project="$(CustomBeforeMicrosoftVisualBasicTargets)" Condition="'$(CustomBeforeMicrosoftVisualBasicTargets)' != '' and Exists('$(CustomBeforeMicrosoftVisualBasicTargets)')" />
<PropertyGroup>
<MSBuildAllProjects>$(MSBuildAllProjects);$(MSBuildThisFileFullPath)</MSBuildAllProjects>
<DefaultLanguageSourceExtension>.vb</DefaultLanguageSourceExtension>
<Language>VB</Language>
<TargetRuntime>Managed</TargetRuntime>
</PropertyGroup>
<!--
The CreateManifestResourceNames target create the manifest resource names from the .RESX
files.
[IN]
@(EmbeddedResource) - The list of EmbeddedResource items that have been pre-processed to add metadata about resource type
Expected Metadata "Type" can either be "Resx" or "Non-Resx"
[OUT]
@(EmbeddedResource) - EmbeddedResource items with metadata
For VB applications the transformation is like:
Resources1.resx => RootNamespace.Resources1 => Build into main assembly
SubFolder\Resources1.resx => RootNamespace.Resources1 => Build into main assembly
Resources1.fr.resx => RootNamespace.Resources1.fr => Build into satellite assembly
Resources1.notaculture.resx => RootNamespace.Resources1.notaculture => Build into main assembly
For other project systems, this transformation may be different.
-->
<PropertyGroup>
<CreateManifestResourceNamesDependsOn></CreateManifestResourceNamesDependsOn>
</PropertyGroup>
<Target
Name="CreateManifestResourceNames"
Condition="'@(EmbeddedResource)' != ''"
DependsOnTargets="$(CreateManifestResourceNamesDependsOn)"
>
<ItemGroup>
<_Temporary Remove="@(_Temporary)" />
</ItemGroup>
<!-- Create manifest names for culture and non-culture Resx files, and for non-culture Non-Resx resources -->
<CreateVisualBasicManifestResourceName
ResourceFiles="@(EmbeddedResource)"
RootNamespace="$(RootNamespace)"
Condition="'%(EmbeddedResource.ManifestResourceName)' == '' and ('%(EmbeddedResource.WithCulture)' == 'false' or '%(EmbeddedResource.Type)' == 'Resx')">
<Output TaskParameter="ResourceFilesWithManifestResourceNames" ItemName="_Temporary" />
</CreateVisualBasicManifestResourceName>
<!-- Create manifest names for all culture non-resx resources -->
<CreateVisualBasicManifestResourceName
ResourceFiles="@(EmbeddedResource)"
RootNamespace="$(RootNamespace)"
PrependCultureAsDirectory="false"
Condition="'%(EmbeddedResource.ManifestResourceName)' == '' and '%(EmbeddedResource.WithCulture)' == 'true' and '%(EmbeddedResource.Type)' == 'Non-Resx'">
<Output TaskParameter="ResourceFilesWithManifestResourceNames" ItemName="_Temporary" />
</CreateVisualBasicManifestResourceName>
<ItemGroup>
<EmbeddedResource Remove="@(EmbeddedResource)" Condition="'%(EmbeddedResource.ManifestResourceName)' == ''"/>
<EmbeddedResource Include="@(_Temporary)" />
<_Temporary Remove="@(_Temporary)" />
</ItemGroup>
</Target>
<PropertyGroup>
<FinalDefineConstants>CONFIG="$(Configuration)"</FinalDefineConstants>
<FinalDefineConstants Condition=" '$(DefineDebug)' == 'true' ">$(FinalDefineConstants),DEBUG=-1</FinalDefineConstants>
<FinalDefineConstants Condition=" '$(DefineTrace)' == 'true' ">$(FinalDefineConstants),TRACE=-1</FinalDefineConstants>
<FinalDefineConstants Condition=" '$(MyType)' != '' ">$(FinalDefineConstants),_MyType="$(MyType)"</FinalDefineConstants>
<FinalDefineConstants Condition=" '$(Platform)' != '' ">$(FinalDefineConstants),PLATFORM="$(Platform)"</FinalDefineConstants>
<FinalDefineConstants Condition=" '$(Platform)' == '' ">$(FinalDefineConstants),PLATFORM="AnyCPU"</FinalDefineConstants>
<FinalDefineConstants Condition=" '$(DefineConstants)' != '' ">$(FinalDefineConstants),$(DefineConstants)</FinalDefineConstants>
<!-- Provide a facility to override UseHostCompilerIfAvailable-->
<UseHostCompilerIfAvailable Condition=" '$(UseHostCompilerIfAvailable)' == ''">true</UseHostCompilerIfAvailable>
</PropertyGroup>
<ItemGroup>
<DocFileItem Include="$(IntermediateOutputPath)$(DocumentationFile)" Condition="'$(DocumentationFile)'!=''"/>
</ItemGroup>
<ItemGroup Condition="'$(_DebugSymbolsProduced)' == 'true' and '$(PdbFile)' != ''">
<_DebugSymbolsIntermediatePathTemporary Include="$(PdbFile)"/>
<!-- Add any missing .pdb extension, as the compiler does -->
<_DebugSymbolsIntermediatePath Include="@(_DebugSymbolsIntermediatePathTemporary->'%(RootDir)%(Directory)%(Filename).pdb')"/>
</ItemGroup>
<PropertyGroup>
<CoreCompileDependsOn>_ComputeNonExistentFileProperty</CoreCompileDependsOn>
<ExportWinMDFile Condition="'$(ExportWinMDFile)' == '' and '$(OutputType)' == 'WinMDObj'">true</ExportWinMDFile>
</PropertyGroup>
<!--
The XamlPreCompile target must remain identical to
the CoreCompile target in this same file.
Any updates to one must be made to the other
-->
<Target
Name="XamlPreCompile"
Inputs="$(MSBuildAllProjects);
@(Compile);
@(_CoreCompileResourceInputs);
$(ApplicationIcon);
$(AssemblyOriginatorKeyFile);
@(ReferencePath);
@(CompiledLicenseFile);
@(LinkResource);
@(EmbeddedDocumentation);
$(Win32Resource);
$(Win32Manifest);
@(Page);
@(ApplicationDefinition);
@(CustomAdditionalCompileInputs)"
Outputs="@(DocFileItem);
@(XamlIntermediateAssembly);
@(_DebugSymbolsIntermediatePath);
$(NonExistentFile);
@(CustomAdditionalCompileOutputs)"
Returns=""
DependsOnTargets="$(CoreCompileDependsOn)"
Condition="'@(Page)' != '' Or '@(ApplicationDefinition)' != ''"
>
<PropertyGroup>
<_NoWarnings Condition=" '$(WarningLevel)' == '0' ">true</_NoWarnings>
<_NoWarnings Condition=" '$(WarningLevel)' == '1' ">false</_NoWarnings>
</PropertyGroup>
<PropertyGroup>
<!-- If we are building in visual studio setting the VbcToolPath will prevent the inproc compiler from being used during compile-->
<VbcToolPath Condition="'$(VbcToolPath)' == '' and '$(BuildingInsideVisualStudio)' != 'true'">$(MsBuildToolsPath)</VbcToolPath>
<!-- If we are targeting winmdobj we want to specifically set the pdbFile property so that it does not collide with the output of winmdexp which we will run subsequently -->
<PdbFile Condition="'$(PdbFile)' == '' and '$(OutputType)' == 'winmdobj' and '$(DebugSymbols)' == 'true'">$(IntermediateOutputPath)$(TargetName).compile.pdb</PdbFile>
</PropertyGroup>
<ItemGroup Condition="'$(TargetingClr2Framework)'=='true'">
<ReferencePath>
<EmbedInteropTypes/>
</ReferencePath>
</ItemGroup>
<!-- Condition is to filter out the _CoreCompileResourceInputs so that it doesn't pass in culture resources to the compiler -->
<Vbc Condition=" '%(_CoreCompileResourceInputs.WithCulture)' != 'true' "
AdditionalLibPaths="$(AdditionalLibPaths)"
AddModules="@(AddModules)"
BaseAddress="$(BaseAddress)"
CodePage="$(CodePage)"
DebugType="$(DebugType)"
DefineConstants="$(FinalDefineConstants)"
DelaySign="$(DelaySign)"
DisabledWarnings="$(NoWarn)"
DocumentationFile="@(DocFileItem)"
EmitDebugInformation="$(DebugSymbols)"
EnvironmentVariables="$(VbcEnvironment)"
ErrorReport="$(ErrorReport)"
FileAlignment="$(FileAlignment)"
GenerateDocumentation="$(GenerateDocumentation)"
HighEntropyVA="$(HighEntropyVA)"
Imports="@(Import)"
KeyContainer="$(KeyContainerName)"
KeyFile="$(KeyOriginatorFile)"
LangVersion="$(LangVersion)"
LinkResources="@(LinkResource)"
MainEntryPoint="$(StartupObject)"
ModuleAssemblyName="$(ModuleAssemblyName)"
NoConfig="true"
NoStandardLib="$(NoCompilerStandardLib)"
NoVBRuntimeReference="$(NoVBRuntimeReference)"
NoWarnings="$(_NoWarnings)"
NoWin32Manifest="$(NoWin32Manifest)"
Optimize="$(Optimize)"
OptionCompare="$(OptionCompare)"
OptionExplicit="$(OptionExplicit)"
OptionInfer="$(OptionInfer)"
OptionStrict="$(OptionStrict)"
OptionStrictType="$(OptionStrictType)"
OutputAssembly="@(XamlIntermediateAssembly)"
Platform="$(PlatformTarget)"
Prefer32Bit="$(Prefer32Bit)"
References="@(ReferencePath)"
RemoveIntegerChecks="$(RemoveIntegerChecks)"
Resources="@(_CoreCompileResourceInputs);@(CompiledLicenseFile)"
ResponseFiles="$(CompilerResponseFile)"
RootNamespace="$(RootNamespace)"
PdbFile="$(PdbFile)"
SdkPath="$(FrameworkPathOverride)"
Sources="@(Compile)"
SubsystemVersion="$(SubsystemVersion)"
TargetCompactFramework="$(TargetCompactFramework)"
TargetType="$(OutputType)"
ToolExe="$(VbcToolExe)"
ToolPath="$(VbcToolPath)"
TreatWarningsAsErrors="$(TreatWarningsAsErrors)"
UseHostCompilerIfAvailable="$(UseHostCompilerIfAvailable)"
Utf8Output="$(Utf8Output)"
VBRuntimePath="$(VBRuntimePath)"
Verbosity="$(VbcVerbosity)"
WarningsAsErrors="$(WarningsAsErrors)"
WarningsNotAsErrors="$(WarningsNotAsErrors)"
Win32Icon="$(ApplicationIcon)"
Win32Manifest="$(Win32Manifest)"
Win32Resource="$(Win32Resource)"
VBRuntime="$(VBRuntime)"
/>
<!-- Only Applicable to the regular CoreCompile:
<ItemGroup>
<_CoreCompileResourceInputs Remove="@(_CoreCompileResourceInputs)" />
</ItemGroup>
<CallTarget Targets="$(TargetsTriggeredByCompilation)" Condition="'$(TargetsTriggeredByCompilation)' != ''"/>
-->
<OnError Condition="'$(OnXamlPreCompileErrorTarget)' != ''" ExecuteTargets="$(OnXamlPreCompileErrorTarget)" />
</Target>
<!--
The CoreCompile target must remain identical to
the XamlPreCompile target in this same file.
Any updates to one must be made to the other
-->
<Target
Name="CoreCompile"
Inputs="$(MSBuildAllProjects);
@(Compile);
@(_CoreCompileResourceInputs);
$(ApplicationIcon);
$(AssemblyOriginatorKeyFile);
@(ReferencePath);
@(CompiledLicenseFile);
@(LinkResource);
@(EmbeddedDocumentation);
$(Win32Resource);
$(Win32Manifest);
@(CustomAdditionalCompileInputs)"
Outputs="@(DocFileItem);
@(IntermediateAssembly);
@(_DebugSymbolsIntermediatePath);
$(NonExistentFile);
@(CustomAdditionalCompileOutputs)"
Returns=""
DependsOnTargets="$(CoreCompileDependsOn)"
>
<PropertyGroup>
<_NoWarnings Condition=" '$(WarningLevel)' == '0' ">true</_NoWarnings>
<_NoWarnings Condition=" '$(WarningLevel)' == '1' ">false</_NoWarnings>
</PropertyGroup>
<PropertyGroup>
<!-- If we are building in visual studio setting the VbcToolPath will prevent the inproc compiler from being used during compile-->
<VbcToolPath Condition="'$(VbcToolPath)' == '' and '$(BuildingInsideVisualStudio)' != 'true'">$(MsBuildToolsPath)</VbcToolPath>
<!-- If we are targeting winmdobj we want to specifically the pdbFile property since we do not want it to collide with the output of winmdexp-->
<PdbFile Condition="'$(PdbFile)' == '' and '$(OutputType)' == 'winmdobj' and '$(DebugSymbols)' == 'true'">$(IntermediateOutputPath)$(TargetName).compile.pdb</PdbFile>
</PropertyGroup>
<ItemGroup Condition="'$(TargetingClr2Framework)'=='true'">
<ReferencePath>
<EmbedInteropTypes/>
</ReferencePath>
</ItemGroup>
<!-- Condition is to filter out the _CoreCompileResourceInputs so that it doesn't pass in culture resources to the compiler -->
<Vbc Condition=" '%(_CoreCompileResourceInputs.WithCulture)' != 'true' "
AdditionalLibPaths="$(AdditionalLibPaths)"
AddModules="@(AddModules)"
BaseAddress="$(BaseAddress)"
CodePage="$(CodePage)"
DebugType="$(DebugType)"
DefineConstants="$(FinalDefineConstants)"
DelaySign="$(DelaySign)"
DisabledWarnings="$(NoWarn)"
DocumentationFile="@(DocFileItem)"
EmitDebugInformation="$(DebugSymbols)"
EnvironmentVariables="$(VbcEnvironment)"
ErrorReport="$(ErrorReport)"
FileAlignment="$(FileAlignment)"
GenerateDocumentation="$(GenerateDocumentation)"
HighEntropyVA="$(HighEntropyVA)"
Imports="@(Import)"
KeyContainer="$(KeyContainerName)"
KeyFile="$(KeyOriginatorFile)"
LangVersion="$(LangVersion)"
LinkResources="@(LinkResource)"
MainEntryPoint="$(StartupObject)"
ModuleAssemblyName="$(ModuleAssemblyName)"
NoConfig="true"
NoStandardLib="$(NoCompilerStandardLib)"
NoVBRuntimeReference="$(NoVBRuntimeReference)"
NoWarnings="$(_NoWarnings)"
NoWin32Manifest="$(NoWin32Manifest)"
Optimize="$(Optimize)"
OptionCompare="$(OptionCompare)"
OptionExplicit="$(OptionExplicit)"
OptionInfer="$(OptionInfer)"
OptionStrict="$(OptionStrict)"
OptionStrictType="$(OptionStrictType)"
OutputAssembly="@(IntermediateAssembly)"
Platform="$(PlatformTarget)"
Prefer32Bit="$(Prefer32Bit)"
PdbFile="$(PdbFile)"
References="@(ReferencePath)"
RemoveIntegerChecks="$(RemoveIntegerChecks)"
Resources="@(_CoreCompileResourceInputs);@(CompiledLicenseFile)"
ResponseFiles="$(CompilerResponseFile)"
RootNamespace="$(RootNamespace)"
SdkPath="$(FrameworkPathOverride)"
Sources="@(Compile)"
SubsystemVersion="$(SubsystemVersion)"
TargetCompactFramework="$(TargetCompactFramework)"
TargetType="$(OutputType)"
ToolExe="$(VbcToolExe)"
ToolPath="$(VbcToolPath)"
TreatWarningsAsErrors="$(TreatWarningsAsErrors)"
UseHostCompilerIfAvailable="$(UseHostCompilerIfAvailable)"
Utf8Output="$(Utf8Output)"
VBRuntimePath="$(VBRuntimePath)"
Verbosity="$(VbcVerbosity)"
WarningsAsErrors="$(WarningsAsErrors)"
WarningsNotAsErrors="$(WarningsNotAsErrors)"
Win32Icon="$(ApplicationIcon)"
Win32Manifest="$(Win32Manifest)"
Win32Resource="$(Win32Resource)"
VBRuntime="$(VBRuntime)"
/>
<ItemGroup>
<_CoreCompileResourceInputs Remove="@(_CoreCompileResourceInputs)" />
</ItemGroup>
<CallTarget Targets="$(TargetsTriggeredByCompilation)" Condition="'$(TargetsTriggeredByCompilation)' != ''"/>
</Target>
<Import Project="Microsoft.Common.targets" />
<Import Project="$(MSBuildToolsPath)\Microsoft.ServiceModel.targets" Condition="('$(TargetFrameworkVersion)' != 'v2.0' and '$(TargetFrameworkVersion)' != 'v3.0' and '$(TargetFrameworkVersion)' != 'v3.5') and Exists('$(MSBuildToolsPath)\Microsoft.ServiceModel.targets')"/>
<Target Name="_SetTargetFrameworkMonikerAttribute" BeforeTargets="GenerateTargetFrameworkMonikerAttribute">
<PropertyGroup>
<!-- This attribute is only available in mscorlib v4 and later -->
<TargetFrameworkMonikerAssemblyAttributeText Condition="'$(TargetFrameworkMoniker)' != '' and '$(TargetingClr2Framework)' != 'true'">
Option Strict Off
Option Explicit On
Imports System
Imports System.Reflection
<Assembly: Global.System.Runtime.Versioning.TargetFrameworkAttribute("$(TargetFrameworkMoniker)", FrameworkDisplayName:="$(TargetFrameworkMonikerDisplayName)")>
</TargetFrameworkMonikerAssemblyAttributeText>
</PropertyGroup>
</Target>
<PropertyGroup>
<Utf8Output Condition="'$(UseHostCompilerIfAvailable)' == 'false' and '$(Utf8Output)' == ''">true</Utf8Output>
<!-- NoCompilerStandardLib maps to the compiler's /nostdlib option. By default we always
want that switch to be passed to the compiler so that either we or the user
provides the references
NoStdLib on the other hand indicates that the user doesn't want standard references
so only if NoStdLib isn't set to true, will we provide the standard references
-->
<NoCompilerStandardLib Condition=" '$(NoCompilerStandardLib)' == '' ">true</NoCompilerStandardLib>
</PropertyGroup>
<!-- Add any "automatic" compiler references that need to be resolved when NoCompilerStandardLib is set
but the user hasn't told us to not include standard references -->
<ItemGroup Condition=" '$(NoCompilerStandardLib)' == 'true' and '$(NoStdLib)' != 'true' ">
<!-- Note that unlike C#, VB gets its mscorlib.dll path from the $(FrameworkPathOverride) property
via the /sdkpath parameter.
In addition to that, VB normally treats System.dll as a "standard library" however since we are
passing NoCompilerStandardLib=true we need an explicit reference to System in order to maintain the
correct behaviour.
-->
<_ExplicitReference Include="$(FrameworkPathOverride)\System.dll" />
</ItemGroup>
<Import Project="$(CustomAfterMicrosoftVisualBasicTargets)" Condition="'$(CustomAfterMicrosoftVisualBasicTargets)' != '' and Exists('$(CustomAfterMicrosoftVisualBasicTargets)')" />
<Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\$(MSBuildThisFile)\ImportAfter\*" Condition="'$(ImportByWildcardAfterMicrosoftVisualBasicTargets)' == 'true' and exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\$(MSBuildThisFile)\ImportAfter')"/>
<Import Project="$(MSBuildUserExtensionsPath)\$(MSBuildToolsVersion)\$(MSBuildThisFile)\ImportAfter\*" Condition="'$(ImportUserLocationsByWildcardAfterMicrosoftVisualBasicTargets)' == 'true' and exists('$(MSBuildUserExtensionsPath)\$(MSBuildToolsVersion)\$(MSBuildThisFile)\ImportAfter')"/>
</Project>