Your IP : 192.168.165.1
<!--
***********************************************************************************************
Microsoft.CSharp.targets
WARNING: DO NOT MODIFY this file unless you are knowledgeable about MSBuild and have
created a backup copy. Incorrect changes to this file will make it
impossible to load or build your projects from the command-line or the IDE.
This file defines the steps in the standard build process specific for C# .NET projects.
For example, it contains the step that actually calls the C# compiler. The remainder
of the build process is defined in Microsoft.Common.targets, which is imported by
this file.
Copyright (C) Microsoft Corporation. All rights reserved.
***********************************************************************************************
-->
<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<PropertyGroup>
<ImportByWildcardBeforeMicrosoftCSharpTargets Condition="'$(ImportByWildcardBeforeMicrosoftCSharpTargets)' == ''">true</ImportByWildcardBeforeMicrosoftCSharpTargets>
<ImportByWildcardAfterMicrosoftCSharpTargets Condition="'$(ImportByWildcardAfterMicrosoftCSharpTargets)' == ''">true</ImportByWildcardAfterMicrosoftCSharpTargets>
<ImportUserLocationsByWildcardBeforeMicrosoftCSharpTargets Condition="'$(ImportUserLocationsByWildcardBeforeMicrosoftCSharpTargets)' == ''">true</ImportUserLocationsByWildcardBeforeMicrosoftCSharpTargets>
<ImportUserLocationsByWildcardAfterMicrosoftCSharpTargets Condition="'$(ImportUserLocationsByWildcardAfterMicrosoftCSharpTargets)' == ''">true</ImportUserLocationsByWildcardAfterMicrosoftCSharpTargets>
</PropertyGroup>
<Import Project="$(MSBuildUserExtensionsPath)\$(MSBuildToolsVersion)\$(MSBuildThisFile)\ImportBefore\*" Condition="'$(ImportUserLocationsByWildcardBeforeMicrosoftCSharpTargets)' == 'true' and exists('$(MSBuildUserExtensionsPath)\$(MSBuildToolsVersion)\$(MSBuildThisFile)\ImportBefore')"/>
<Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\$(MSBuildThisFile)\ImportBefore\*" Condition="'$(ImportByWildcardBeforeMicrosoftCSharpTargets)' == 'true' and exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\$(MSBuildThisFile)\ImportBefore')"/>
<PropertyGroup>
<CustomBeforeMicrosoftCSharpTargets Condition="'$(CustomBeforeMicrosoftCSharpTargets)'==''">$(MSBuildExtensionsPath)\v$(MSBuildToolsVersion)\Custom.Before.$(MSBuildThisFile)</CustomBeforeMicrosoftCSharpTargets>
<CustomAfterMicrosoftCSharpTargets Condition="'$(CustomAfterMicrosoftCSharpTargets)'==''">$(MSBuildExtensionsPath)\v$(MSBuildToolsVersion)\Custom.After.$(MSBuildThisFile)</CustomAfterMicrosoftCSharpTargets>
</PropertyGroup>
<Import Project="$(CustomBeforeMicrosoftCSharpTargets)" Condition="'$(CustomBeforeMicrosoftCSharpTargets)' != '' and Exists('$(CustomBeforeMicrosoftCSharpTargets)')" />
<PropertyGroup>
<MSBuildAllProjects>$(MSBuildAllProjects);$(MSBuildThisFileFullPath)</MSBuildAllProjects>
<DefaultLanguageSourceExtension>.cs</DefaultLanguageSourceExtension>
<Language>C#</Language>
<TargetRuntime>Managed</TargetRuntime>
</PropertyGroup>
<!--
The CreateManifestResourceNames target create the manifest resource names from the .RESX
files.
[IN]
@(EmbeddedResource) - The list of EmbeddedResource items that have been pre-processed to add metadata about resource type
Expected Metadata "Type" can either be "Resx" or "Non-Resx"
[OUT]
@(EmbeddedResource) - EmbeddedResource items with metadata
For C# applications the transformation is like:
Resources1.resx => RootNamespace.Resources1 => Build into main assembly
SubFolder\Resources1.resx => RootNamespace.SubFolder.Resources1 => Build into main assembly
Resources1.fr.resx => RootNamespace.Resources1.fr => Build into satellite assembly
Resources1.notaculture.resx => RootNamespace.Resources1.notaculture => Build into main assembly
For other project systems, this transformation may be different.
-->
<PropertyGroup>
<CreateManifestResourceNamesDependsOn></CreateManifestResourceNamesDependsOn>
</PropertyGroup>
<Target
Name="CreateManifestResourceNames"
Condition="'@(EmbeddedResource)' != ''"
DependsOnTargets="$(CreateManifestResourceNamesDependsOn)"
>
<ItemGroup>
<_Temporary Remove="@(_Temporary)" />
</ItemGroup>
<!-- Create manifest names for culture and non-culture Resx files, and for non-culture Non-Resx resources -->
<CreateCSharpManifestResourceName
ResourceFiles="@(EmbeddedResource)"
RootNamespace="$(RootNamespace)"
Condition="'%(EmbeddedResource.ManifestResourceName)' == '' and ('%(EmbeddedResource.WithCulture)' == 'false' or '%(EmbeddedResource.Type)' == 'Resx')">
<Output TaskParameter="ResourceFilesWithManifestResourceNames" ItemName="_Temporary" />
</CreateCSharpManifestResourceName>
<!-- Create manifest names for all culture non-resx resources -->
<CreateCSharpManifestResourceName
ResourceFiles="@(EmbeddedResource)"
RootNamespace="$(RootNamespace)"
PrependCultureAsDirectory="false"
Condition="'%(EmbeddedResource.ManifestResourceName)' == '' and '%(EmbeddedResource.WithCulture)' == 'true' and '%(EmbeddedResource.Type)' == 'Non-Resx'">
<Output TaskParameter="ResourceFilesWithManifestResourceNames" ItemName="_Temporary" />
</CreateCSharpManifestResourceName>
<ItemGroup>
<EmbeddedResource Remove="@(EmbeddedResource)" Condition="'%(EmbeddedResource.ManifestResourceName)' == ''"/>
<EmbeddedResource Include="@(_Temporary)" />
<_Temporary Remove="@(_Temporary)" />
</ItemGroup>
</Target>
<PropertyGroup>
<!-- Provide a facility to override UseHostCompilerIfAvailable-->
<UseHostCompilerIfAvailable Condition=" '$(UseHostCompilerIfAvailable)' == ''">true</UseHostCompilerIfAvailable>
</PropertyGroup>
<ItemGroup>
<DocFileItem Include="$(DocumentationFile)" Condition="'$(DocumentationFile)'!=''"/>
</ItemGroup>
<ItemGroup Condition="'$(_DebugSymbolsProduced)' == 'true' and '$(PdbFile)' != ''">
<_DebugSymbolsIntermediatePathTemporary Include="$(PdbFile)"/>
<!-- Add any missing .pdb extension, as the compiler does -->
<_DebugSymbolsIntermediatePath Include="@(_DebugSymbolsIntermediatePathTemporary->'%(RootDir)%(Directory)%(Filename).pdb')"/>
</ItemGroup>
<PropertyGroup>
<CoreCompileDependsOn>_ComputeNonExistentFileProperty</CoreCompileDependsOn>
<ExportWinMDFile Condition="'$(ExportWinMDFile)' == '' and '$(OutputType)' == 'WinMDObj'">true</ExportWinMDFile>
</PropertyGroup>
<!--
The XamlPreCompile target must remain identical to
the CoreCompile target in this same file.
Any updates to one must be made to the other
-->
<Target
Name="XamlPreCompile"
Inputs="$(MSBuildAllProjects);
@(Compile);
@(_CoreCompileResourceInputs);
$(ApplicationIcon);
$(AssemblyOriginatorKeyFile);
@(ReferencePath);
@(CompiledLicenseFile);
@(LinkResource);
@(EmbeddedDocumentation);
$(Win32Resource);
$(Win32Manifest);
@(CustomAdditionalCompileInputs);
@(Page);
@(ApplicationDefinition)"
Outputs="@(DocFileItem);
@(XamlIntermediateAssembly);
@(_DebugSymbolsIntermediatePath);
$(NonExistentFile);
@(CustomAdditionalCompileOutputs)"
Condition="'@(Page)' != '' Or '@(ApplicationDefinition)' != ''"
Returns=""
DependsOnTargets="$(CoreCompileDependsOn)"
>
<!-- These two compiler warnings are raised when a reference is bound to a different version
than specified in the assembly reference version number. MSBuild raises the same warning in this case,
so the compiler warning would be redundant. -->
<PropertyGroup Condition="('$(TargetFrameworkVersion)' != 'v1.0') and ('$(TargetFrameworkVersion)' != 'v1.1')">
<NoWarn>$(NoWarn);1701;1702</NoWarn>
</PropertyGroup>
<PropertyGroup>
<!-- To match historical behavior, when inside VS11+ disable the warning from csc.exe indicating that no sources were passed in-->
<NoWarn Condition=" '$(BuildingInsideVisualStudio)' == 'true' and '$(VisualStudioVersion)' != '' and '$(VisualStudioVersion)' > '10.0' ">$(NoWarn);2008</NoWarn>
</PropertyGroup>
<PropertyGroup>
<!-- If we are building in visual studio setting the CscToolPath will prevent the inproc compiler from being used during compile-->
<CscToolPath Condition="'$(CscToolPath)' == '' and '$(BuildingInsideVisualStudio)' != 'true'" >$(MsBuildToolsPath)</CscToolPath>
</PropertyGroup>
<ItemGroup Condition="'$(TargetingClr2Framework)'=='true'">
<ReferencePath>
<EmbedInteropTypes/>
</ReferencePath>
</ItemGroup>
<PropertyGroup>
<!-- If the user has specified AppConfigForCompiler, we'll use it. If they have not, but they set UseAppConfigForCompiler,
then we'll use AppConfig -->
<AppConfigForCompiler Condition="'$(AppConfigForCompiler)' == '' and '$(UseAppConfigForCompiler)' == 'true'">$(AppConfig)</AppConfigForCompiler>
<!-- If we are targeting winmdobj we want to specifically the pdbFile property since we do not want it to collide with the output of winmdexp-->
<PdbFile Condition="'$(PdbFile)' == '' and '$(OutputType)' == 'winmdobj' and '$(_DebugSymbolsProduced)' == 'true'">$(IntermediateOutputPath)$(TargetName).compile.pdb</PdbFile>
</PropertyGroup>
<!-- Condition is to filter out the _CoreCompileResourceInputs so that it doesn't pass in culture resources to the compiler -->
<Csc Condition=" '%(_CoreCompileResourceInputs.WithCulture)' != 'true' "
AdditionalLibPaths="$(AdditionalLibPaths)"
AddModules="@(AddModules)"
AllowUnsafeBlocks="$(AllowUnsafeBlocks)"
ApplicationConfiguration="$(AppConfigForCompiler)"
BaseAddress="$(BaseAddress)"
CheckForOverflowUnderflow="$(CheckForOverflowUnderflow)"
CodePage="$(CodePage)"
DebugType="$(DebugType)"
DefineConstants="$(DefineConstants)"
DelaySign="$(DelaySign)"
DisabledWarnings="$(NoWarn)"
DocumentationFile="@(DocFileItem)"
EmitDebugInformation="$(DebugSymbols)"
EnvironmentVariables="$(CscEnvironment)"
ErrorEndLocation="$(ErrorEndLocation)"
ErrorReport="$(ErrorReport)"
FileAlignment="$(FileAlignment)"
GenerateFullPaths="$(GenerateFullPaths)"
HighEntropyVA="$(HighEntropyVA)"
KeyContainer="$(KeyContainerName)"
KeyFile="$(KeyOriginatorFile)"
LangVersion="$(LangVersion)"
LinkResources="@(LinkResource)"
MainEntryPoint="$(StartupObject)"
ModuleAssemblyName="$(ModuleAssemblyName)"
NoConfig="true"
NoLogo="$(NoLogo)"
NoStandardLib="$(NoCompilerStandardLib)"
NoWin32Manifest="$(NoWin32Manifest)"
Optimize="$(Optimize)"
OutputAssembly="@(XamlIntermediateAssembly)"
PdbFile="$(PdbFile)"
Platform="$(PlatformTarget)"
Prefer32Bit="$(Prefer32Bit)"
PreferredUILang="$(PreferredUILang)"
References="@(ReferencePath)"
Resources="@(_CoreCompileResourceInputs);@(CompiledLicenseFile)"
ResponseFiles="$(CompilerResponseFile)"
Sources="@(Compile)"
SubsystemVersion="$(SubsystemVersion)"
TargetType="$(OutputType)"
ToolExe="$(CscToolExe)"
ToolPath="$(CscToolPath)"
TreatWarningsAsErrors="$(TreatWarningsAsErrors)"
UseHostCompilerIfAvailable="$(UseHostCompilerIfAvailable)"
Utf8Output="$(Utf8Output)"
WarningLevel="$(WarningLevel)"
WarningsAsErrors="$(WarningsAsErrors)"
WarningsNotAsErrors="$(WarningsNotAsErrors)"
Win32Icon="$(ApplicationIcon)"
Win32Manifest="$(Win32Manifest)"
Win32Resource="$(Win32Resource)"
/>
<!-- Only Applicable to the regular CoreCompile:
<ItemGroup>
<_CoreCompileResourceInputs Remove="@(_CoreCompileResourceInputs)" />
</ItemGroup>
<CallTarget Targets="$(TargetsTriggeredByCompilation)" Condition="'$(TargetsTriggeredByCompilation)' != ''"/>
-->
<OnError Condition="'$(OnXamlPreCompileErrorTarget)' != ''" ExecuteTargets="$(OnXamlPreCompileErrorTarget)" />
</Target>
<!--
The CoreCompile target must remain identical to
the XamlPreCompile target in this same file.
Any updates to one must be made to the other
-->
<Target
Name="CoreCompile"
Inputs="$(MSBuildAllProjects);
@(Compile);
@(_CoreCompileResourceInputs);
$(ApplicationIcon);
$(AssemblyOriginatorKeyFile);
@(ReferencePath);
@(CompiledLicenseFile);
@(LinkResource);
@(EmbeddedDocumentation);
$(Win32Resource);
$(Win32Manifest);
@(CustomAdditionalCompileInputs)"
Outputs="@(DocFileItem);
@(IntermediateAssembly);
@(_DebugSymbolsIntermediatePath);
$(NonExistentFile);
@(CustomAdditionalCompileOutputs)"
Returns=""
DependsOnTargets="$(CoreCompileDependsOn)"
>
<!-- These two compiler warnings are raised when a reference is bound to a different version
than specified in the assembly reference version number. MSBuild raises the same warning in this case,
so the compiler warning would be redundant. -->
<PropertyGroup Condition="('$(TargetFrameworkVersion)' != 'v1.0') and ('$(TargetFrameworkVersion)' != 'v1.1')">
<NoWarn>$(NoWarn);1701;1702</NoWarn>
</PropertyGroup>
<PropertyGroup>
<!-- To match historical behavior, when inside VS11+ disable the warning from csc.exe indicating that no sources were passed in-->
<NoWarn Condition=" '$(BuildingInsideVisualStudio)' == 'true' and '$(VisualStudioVersion)' != '' and '$(VisualStudioVersion)' > '10.0' ">$(NoWarn);2008</NoWarn>
</PropertyGroup>
<PropertyGroup>
<!-- If we are building in visual studio setting the CscToolPath will prevent the inproc compiler from being used during compile-->
<CscToolPath Condition="'$(CscToolPath)' == '' and '$(BuildingInsideVisualStudio)' != 'true'" >$(MsBuildToolsPath)</CscToolPath>
</PropertyGroup>
<ItemGroup Condition="'$(TargetingClr2Framework)'=='true'">
<ReferencePath>
<EmbedInteropTypes/>
</ReferencePath>
</ItemGroup>
<PropertyGroup>
<!-- If the user has specified AppConfigForCompiler, we'll use it. If they have not, but they set UseAppConfigForCompiler,
then we'll use AppConfig -->
<AppConfigForCompiler Condition="'$(AppConfigForCompiler)' == '' and '$(UseAppConfigForCompiler)' == 'true'">$(AppConfig)</AppConfigForCompiler>
<!-- If we are targeting winmdobj we want to specifically the pdbFile property since we do not want it to collide with the output of winmdexp-->
<PdbFile Condition="'$(PdbFile)' == '' and '$(OutputType)' == 'winmdobj' and '$(_DebugSymbolsProduced)' == 'true'">$(IntermediateOutputPath)$(TargetName).compile.pdb</PdbFile>
</PropertyGroup>
<!-- Condition is to filter out the _CoreCompileResourceInputs so that it doesn't pass in culture resources to the compiler -->
<Csc Condition=" '%(_CoreCompileResourceInputs.WithCulture)' != 'true' "
AdditionalLibPaths="$(AdditionalLibPaths)"
AddModules="@(AddModules)"
AllowUnsafeBlocks="$(AllowUnsafeBlocks)"
ApplicationConfiguration="$(AppConfigForCompiler)"
BaseAddress="$(BaseAddress)"
CheckForOverflowUnderflow="$(CheckForOverflowUnderflow)"
CodePage="$(CodePage)"
DebugType="$(DebugType)"
DefineConstants="$(DefineConstants)"
DelaySign="$(DelaySign)"
DisabledWarnings="$(NoWarn)"
DocumentationFile="@(DocFileItem)"
EmitDebugInformation="$(DebugSymbols)"
EnvironmentVariables="$(CscEnvironment)"
ErrorEndLocation="$(ErrorEndLocation)"
ErrorReport="$(ErrorReport)"
FileAlignment="$(FileAlignment)"
GenerateFullPaths="$(GenerateFullPaths)"
HighEntropyVA="$(HighEntropyVA)"
KeyContainer="$(KeyContainerName)"
KeyFile="$(KeyOriginatorFile)"
LangVersion="$(LangVersion)"
LinkResources="@(LinkResource)"
MainEntryPoint="$(StartupObject)"
ModuleAssemblyName="$(ModuleAssemblyName)"
NoConfig="true"
NoLogo="$(NoLogo)"
NoStandardLib="$(NoCompilerStandardLib)"
NoWin32Manifest="$(NoWin32Manifest)"
Optimize="$(Optimize)"
OutputAssembly="@(IntermediateAssembly)"
PdbFile="$(PdbFile)"
Platform="$(PlatformTarget)"
Prefer32Bit="$(Prefer32Bit)"
PreferredUILang="$(PreferredUILang)"
References="@(ReferencePath)"
Resources="@(_CoreCompileResourceInputs);@(CompiledLicenseFile)"
ResponseFiles="$(CompilerResponseFile)"
Sources="@(Compile)"
SubsystemVersion="$(SubsystemVersion)"
TargetType="$(OutputType)"
ToolExe="$(CscToolExe)"
ToolPath="$(CscToolPath)"
TreatWarningsAsErrors="$(TreatWarningsAsErrors)"
UseHostCompilerIfAvailable="$(UseHostCompilerIfAvailable)"
Utf8Output="$(Utf8Output)"
WarningLevel="$(WarningLevel)"
WarningsAsErrors="$(WarningsAsErrors)"
WarningsNotAsErrors="$(WarningsNotAsErrors)"
Win32Icon="$(ApplicationIcon)"
Win32Manifest="$(Win32Manifest)"
Win32Resource="$(Win32Resource)"
/>
<ItemGroup>
<_CoreCompileResourceInputs Remove="@(_CoreCompileResourceInputs)" />
</ItemGroup>
<CallTarget Targets="$(TargetsTriggeredByCompilation)" Condition="'$(TargetsTriggeredByCompilation)' != ''"/>
</Target>
<Import Project="Microsoft.Common.targets" />
<Import Project="$(MSBuildToolsPath)\Microsoft.ServiceModel.targets" Condition="('$(TargetFrameworkVersion)' != 'v2.0' and '$(TargetFrameworkVersion)' != 'v3.0' and '$(TargetFrameworkVersion)' != 'v3.5') and Exists('$(MSBuildToolsPath)\Microsoft.ServiceModel.targets')"/>
<Target Name="_SetTargetFrameworkMonikerAttribute" BeforeTargets="GenerateTargetFrameworkMonikerAttribute">
<PropertyGroup>
<TargetFrameworkMonikerAssemblyAttributeText Condition="'$(TargetFrameworkMoniker)' != '' and '$(TargetingClr2Framework)' != 'true'">
// <autogenerated />
using System%3b
using System.Reflection%3b
[assembly: global::System.Runtime.Versioning.TargetFrameworkAttribute("$(TargetFrameworkMoniker)", FrameworkDisplayName = "$(TargetFrameworkMonikerDisplayName)")]
</TargetFrameworkMonikerAssemblyAttributeText>
</PropertyGroup>
</Target>
<PropertyGroup>
<Utf8Output Condition="'$(Utf8Output)' == ''">true</Utf8Output>
<!-- NoCompilerStandardLib maps to the compiler's /nostdlib option. By default we always
want that switch to be passed to the compiler so that either we or the user
provides the references
NoStdLib on the other hand indicates that the user doesn't want standard references
so only if NoStdLib isn't set to true, will we provide the standard references
-->
<NoCompilerStandardLib Condition=" '$(NoCompilerStandardLib)' == '' ">true</NoCompilerStandardLib>
<ErrorEndLocation Condition="'$(BuildingInsideVisualStudio)' == 'true' and '$(ErrorEndLocation)' == ''">true</ErrorEndLocation>
<!-- When building inside VS, by default use the same language for compiler messages as VS itself does. -->
<PreferredUILang Condition="'$(BuildingInsideVisualStudio)' == 'true' and '$(PreferredUILang)' == ''">$([System.Globalization.CultureInfo]::CurrentUICulture.Name)</PreferredUILang>
</PropertyGroup>
<!-- Add any "automatic" compiler references that need to be resolved when NoCompilerStandardLib is set
but the user hasn't told us to not include standard references -->
<ItemGroup Condition=" '$(NoCompilerStandardLib)' == 'true' and '$(NoStdLib)' != 'true' ">
<!-- Note that unlike VB, C# does not automatically locate System.dll as a "standard library"
instead the reference is always passed from the project. Also, for mscorlib.dll
we need to provide the explicit location in order to maintain the correct behaviour
-->
<_ExplicitReference Include="$(FrameworkPathOverride)\mscorlib.dll" />
</ItemGroup>
<Import Project="$(CustomAfterMicrosoftCSharpTargets)" Condition="'$(CustomAfterMicrosoftCSharpTargets)' != '' and Exists('$(CustomAfterMicrosoftCSharpTargets)')" />
<Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\$(MSBuildThisFile)\ImportAfter\*" Condition="'$(ImportByWildcardAfterMicrosoftCSharpTargets)' == 'true' and exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\$(MSBuildThisFile)\ImportAfter')"/>
<Import Project="$(MSBuildUserExtensionsPath)\$(MSBuildToolsVersion)\$(MSBuildThisFile)\ImportAfter\*" Condition="'$(ImportUserLocationsByWildcardAfterMicrosoftCSharpTargets)' == 'true' and exists('$(MSBuildUserExtensionsPath)\$(MSBuildToolsVersion)\$(MSBuildThisFile)\ImportAfter')"/>
</Project>